23rd edition · Gujarat
EngiExpo Rajkot, 21–24 November 2027
The 23rd EngiExpo runs for 4 days at NSIC Ground. Visitor entry is free, digital pass by email and WhatsApp on registration. EngiNewsIndia reports from the floor and publishes a show report after the edition closes.
The show, in facts
- Edition
- 23rd EngiExpo
- Dates
- to
- Venue
- NSIC Ground
- City
- Rajkot, Gujarat
- Visitor entry
- free, digital pass by email and WhatsApp on registration
Sectors the organiser names
- machine tools and CNC
- welding and cutting
- fasteners and hardware
- pumps and compressors
- steel and alloys
- electrical and automation
- safety and fire
7 sectors, quoted from the organiser's own schedule page, which says the show covers more than these. EngiNewsIndia does not publish EngiExpo's exhibitor or visitor counts: no audited document behind them has been filed, and a figure nobody can check is not a figure. Dates, venue and sectors from engiexpo.com, read on 21 September 2026.
Gujarat on EngiNewsIndia
What we have reported from Gujarat — the industry the Rajkot floor is drawn from.
- Jyoti CNC gets ECMS approval for ₹1,020.65 crore in Rajkot
Jyoti CNC Automation told BSE and NSE that MeitY approved ₹1,020.65 crore of Rajkot capex under the Electronics Components Manufacturing Scheme.
- Battery plants could add 2 million jobs by FY30, Adecco says
Adecco India puts battery-industry hiring at 1.5 to 2 million jobs by FY30, a quarter of them direct, with Gujarat second only to Karnataka in hiring share.
- CG Semi ships its first chips from the Sanand OSAT plant
CG Semi has started commercial production at its G1 outsourced assembly and test plant in Sanand, Gujarat, with a peak capacity of 300 million units a year.
Where this edition sits in the circuit
Questions about this edition
When and where is EngiExpo Rajkot 2027?
The 23rd EngiExpo runs 21–24 November 2027, 4 days, at NSIC Ground in Rajkot, Gujarat. Dates and venue are as the organiser publishes them at engiexpo.com; if the two disagree, the organiser's page is right and this one is corrected.
Is entry to EngiExpo Rajkot free?
Yes. Visitor entry is free, digital pass by email and WhatsApp on registration. Register on the organiser's site and the pass arrives without a fee.
What is on show at EngiExpo Rajkot?
The organiser names 7 sectors on its schedule page: machine tools and CNC; welding and cutting; fasteners and hardware; pumps and compressors; steel and alloys; electrical and automation; safety and fire. It also says the show covers more than those. EngiNewsIndia does not restate the organiser's exhibitor or visitor counts, because no audited document behind them has been filed.